Netgear WG-302NA ProSafe Wireless Access Point

Features IEEE 802.11g 54 Mbps Wireless Access Point (2) 5 dBi detachable antennas Typical Maximum Power Output: 19.8 dBm Typical Maximum Receive Sensitivity: 96 dB 10BaseT/100BaseTX/RJ-45 port with Auto Uplink (Auto MDIX) with IEEE 802.3af Power over Ethernet (PoE) support 1 console port with standard RS-232C interface with DB-9 male connector 2 reverse SMA antenna connectors Processor: Intel 422 Memory: 8MB Flash, 16MB DRAM LEDs: power, test, 100 Mbps, Link/ACT, and WLAN 802.11g Network Management: Remote configuration and management through Web browser, SNMP or Telnet with command line interface (CLI). SNMP management supports SNMP MIB I, MIB II, and 802.11 MIB Wireless Distribution System Point-to-point wireless bridge mode Point-to-multipoint wireless bridge mode Repeater mode Simultaneous wireless bridge and access point mode Adjustable output power control from 100 mW down to 0 mW Security: 40/64-, 128-, and 152-bit WEP encryption, Block SSID Broadcast, VPN pass-through support, MAC address filtering with access control lists -- up to 256 users, 802.1x RADIUS support with EAP TLS, TTLS, PEAP, Wi-Fi Protected Access (WPA), Secure SSH Telnet, Secure Socket Layer (SSL) remote management login (Free basic installation support provided for 90 days from date of purchase; optional premium support available), Wireless isolation enables peer-to-peer blocking so users may not access another user's PC Requires: Configuring the Access Point: Windows 98, Me, 2000, or XP 2 Mbytes of available disk space Approvals: IEEE 802.11g (2.4 GHz Frequency Band, DSSS Modulation Technique), IEEE 802.3af Power over Ethernet (PoE), FCC Part 15 Subpart B and Subpart C, CE EN60950, EN 300328-2 v1.1.1 (2000-07), EMC EN301489-1 v1.2.1, (2000-08), and EN301489-17 v1.1.1 (20